We – EPG Team the greatest gearbox & motors , couplings and gears manufacturing facility in China with 5 different branches. For a lot more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
Solution characteristic:
1. Stator measurement: 30mm
two. Electrical power: 53W
three. Shafe dia: 6mm
four. Thermal safety, reputable
Rated voltage 110~120V/220~240V-fifty/60Hz
Standard used:
Exhaust admirer, air purifier, micro-oven, fan, induction cooker, fridge, pump, heater, hood oven, blwer, air conditioner, Heater machines, dehumidifiers
Thermal protector with one particular shot fuse or multi shot fuse
Shaft diameter(mm)=4-6mm
Shaft size(mm)=according to customer’s necessity
Velocity(r/min): 2600-3400 dependent on different stator thickness
Enthusiast Diameter: 60mm
Enthusiast length: Optional from 120mm to 360mm
Model | AOF Measurement | SHAFT DIA | VOLT | Enter Energy | TORQUE (g.cm) | Pace RATED |
YJ6012 | 12mm | 4mm | a hundred and ten-240V | 18W | a hundred and twenty | 3000RPM |
YJ6014 | 14mm | four.5mm | one hundred ten-240V | 25W | a hundred and fifty | 3000RPM |
YJ6016 | 16mm | four.5mm | one hundred ten-240V | 30W | 180 | 3000RPM |
YJ6571 | 20mm | 5mm | one hundred ten-240V | 35W | 260 | 3000RPM |
YJ6571 | 25mm | 6mm | one hundred ten-240V | 45W | 350 | 3000RPM |
YJ6030 | 30mm | 6mm | a hundred and ten-240V | 53W | 380 | 3000RPM |
ABOUT US
Ritscher group was established up in 2006.we constantly concentrate on micro-motors for family electrical appliance and ept appliance because environment up.presently we have two skilled micro-motor factories in China which severally located in HangZhou city and HangZhou city.it has an region of 25,000 square meters vegetation and more than three hundred personnel, once-a-year output is 3 million pcs and has 5 million pcs yearly producing capability.right after several a long time development,we had built a wonderful popularity in the market and obtained a lot more and a lot more customers’ ept in the planet.
We started from shaded pole motors at starting, up to now,our merchandise included of shaded pole motors,synchronous motors,stepping motors ,capacitor motors, BLDC motors, DC motors and compressors. Our solution are extensively employed for ma ept fridges, freezers, micro-wave ovens, air heaters, air exhausters, ventilators,ovens, air filter, therapeutic massage machines and many other equipments.
As a realiable top quality guaranty,Ritscher has total R&D departement,QC office,making section,acquire division etc. has best creating gear like Aluminum diecasting, Zinc diecasting, Sheet metal stamping, Plastic injection molding etc. also take a look at/ detection device like multiplex temp measuring system, efficiency parameter inspection gadget, Phenol peptide remedy pinhole tester,Anechoic place and many others.
Endeavoring to supply the ideal merchandise and services to consumers,we always do the most work to become an exceptional manufacturer of micro motors.
Ritscher is often inclined to create honest business connection with friends from all over the planet.
Welcome get in touch with with us!
Get ritscher ,take pleasure in contemporary life!
Our business FAQ for you
(1) Q: What type motors you can offer?
A:For now,we mainly provide Kit ept Hood Motor,DC Motor,Gear Motor,Supporter Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor and so forth.
(2) Q: Is it possible to go to your factory
A: Sure. But you should kindly preserve us posted a number of times in progress. We need to examine our
routine to see if we are obtainable then.
(3) Q: Can I get some samples
A: It relies upon. If only a few samples for private use or replacement, I am concerned it will
be difficult for us to provide, since all of our motors are customized made and no inventory
available if there is no even more demands. If just sample screening ahead of the formal buy and
our MOQ, price tag and other phrases are suitable, we’d enjoy to provide samples.
(4) Q: Is there a MOQ for your motors?
A: Yes. The MOQ is among a thousand~ten,000pcs for different versions right after sample acceptance.
But it truly is also alright for us to acknowledge smaller sized tons like a couple of dozens, hundreds or countless numbers
For the preliminary 3 orders right after sample acceptance.For samples, there is no MOQ need. But the considerably less the better (like no much more than 5pcs) on issue that the quantity is sufficient in circumstance any adjustments needed right after original screening.
The use of unique products manufacturer’s (OEM) part figures or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our organization and the listed substitution elements contained herein are not sponsored, authorized, or created by the OEM.