SNOW PLOW Electrical power UNIT

Common Description
Consisting of the strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this energy unit is created to operate material managing gear. The decreasing movement is achived from the solenoid valve with the reducing speed controlled by an adjustable needle valve. The left and suitable functions are equipped using a dual pilot operated verify valve and cross-over relief valves.
Remark: Please check with our product sales engineer for the distinct pump displacement, motor electrical power or tank capacity.
Distinctive Notes
1. This power unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
two. Clean the many hydraulic components concerned prior to installation of the electrical power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which should really also be clean and totally free of impurities.N46 hydraulic oil is recommended.
four. This energy unit really should be mounted horizontal.
five. Check the oil degree from the tank right after the very first commence of the power unit.
6. Oil shifting is needed immediately after the first 100 operation hours, afterwards as soon as just about every 3000 hrs.