Basic Description
This power unit options a long term magnet motor by using a electrical power up gravity down circuit. Activate the commence solenoid to start out the motor to lift the machine. The lowing movement is activated from the solenoid valve with the decreasing velocity managed by the strain compensated flow management valve. Goods of this series could be extensively utilized in the sector of logistic products such as fork lift, mini lift table, and so on.
Specific Notes
one. This energy unit is of S3 duty cycle, i.e.,non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean the many hydraulic components concerned ahead of installation of the power unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst, which should also be clean and free of impurities. N46 hydraulic oil is recommended.
four. This electrical power unit is built to be mounted vertically.
5. Check the oil degree from the tank just after the first star of the electrical power unit.
6. Oil shifting is needed following the original a hundred operation hours,afterwards the moment every 3000 hours.
7. More pump sizes and tank sizes are avaiable on request.