China Custom CZPT XL Types High-Pressure Rubber Flexible Spider Jaw Coupling

Product Description

XL Types High-Pressure Rubber Flexible Spider Jaw Coupling 

XL Type Flexible Spider Jaw Coupling comprises a convex claw block that can be avoided due to external constraints, internal deformation, and centrifugal impact deformation; in concave-convex claw, the pressure on the surface of the involute tooth is very small, even under overload, the tooth will not wear or deformation.
 

Flexible jaw couplings are used in power transmission of industrial equipment such as metallurgy, mining, lifting, transportation, petroleum, chemical industry, shipbuilding, textile, light industry, agricultural machinery, and industrial equipment such as pumps, fans, compressors, machine tools, gearboxes, mixers, printing machines, and conveyors.

 

Advantage:

Run smoothly;

Easy to install;

Compensate displacement (axial, radial, angular);

 XL Star Type Flexible Coupling Main Dimension:

Type	Nominal torque Tn/N·m	Shaft hole diameter	L		D	D1	B1	S
		d1,d2	Y	J1,Z1
XL1	20	6,7	18	–	40	32	12	2
		8,9	22	–
		10,11	25	22
		12,14	32	27
		16,18,19	42	30
XL2	71	8,9	22	–	55	40	14
		10,11	25	22
		12,14	32	27
		16,18,19	42	30
		20,22,24	52	38
XL3	200	10,11	25	22	65	48	15	2.5
		12,14	32	27
		16,18,19	42	30
		20,22,24	52	38
		25,28	62	44
XL4	400	12,14	32	27	80	66	18	3
		16,18,19	42	30
		20,22,24	52	38
		25,28	62	44
		30,32,35,38	82	60
XL5	560	14	32	27	95	75	20
		16,18,19	42	30
		20,22,24	52	38
		25,28	62	44
		30,32,35,38	82	60
		40,42	112	84
XL6	630	16,18,19	42	30	105	85	21	3.5
		20,22,24	52	38
		25,28	62	44
		30,32,35,38	82	60
		40,42,45,48	112	84
XL7	800	20,22,24	52	38	120	98	22	4
		25,28	62	44
		30,32,35,38	82	60
		40,42,45,48,50,55	112	84
XL8	900	22,24	52	38	135	115	26	4.5
		25,28	62	44
		30,32,35,38	82	60
		40,42,45,48,50,55	112	84
		60,63,65	142	107
XL9	2000	30,32,35,38	82	60	160	135	30	5
		40,42,45,48,50,55,56	112	84
		60,63,65,70,71,75	142	107
XL10	5000	40,42,45,48,50,55,56	112	84	200	160	34	5.5
		60,63,65,70,71,75	142	107
		80,85,90	172	132
XL11	7100	50,55,56	112	84	225	180	38	6
		60,63,65,70,71,75	142	107
		80,85,90,95	172	132
		100	212	167
XL12	8000	60,63,65,70,71,75	142	107	255	200	42	6.5
		80,85,90,95	172	132
		100,110	212	167
XL13	10000	60,63,65,70,71,75	142	107	290	230	46	7
		80,85,90,95	172	132
		100,110,120,125	212	167
XL14	14000	60,63,65,70,71,75	142	107	320	255	50	7.5
		80,85,90,95	172	132
		100,110,120,125	212	167
		130,140	252	202
XL15	20000	80,85,90,95	172	132	370	290	57	9
		100,110,120,125	212	167
		130,140,150	252	202
		160	302	242
XL16	25000	85,90,95	172	132	420	325	64	10.5
		100,110,120,125	212	167
		130,140,150	252	202
		160,170,180	302	242

Product Show:

♦Other Products List

Transmission Machinery  Parts Name	Model
Universal Coupling	WS, WSD, WSP
Cardan Shaft	SWC, SWP, SWZ
Tooth Coupling	CL, CLZ, GCLD, GIICL, GICL, NGCL, GGCL, GCLK
Disc Coupling	JMI, JMIJ, JMII, JMIIJ
High Flexible Coupling	LM
Chain Coupling	GL
Jaw Coupling	LT
Grid Coupling	JS

♦Our Company
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective. To perfect our service, we provide products of good quality at a reasonable price.

Welcome to customize products from our factory and please provide your design drawings or contact us if you need other requirements.

♦Our Services
1. Design Services
Our design team has experience in coupling relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.

2. Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

3. Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.

4. Research & Development
We usually research the new needs of the market and develop new models when there are new cars in the market.

5. Quality Control
Every step should be a special test by Professional Staff according to the standard of ISO9001 and TS16949.

♦FAQ
Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.

Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artwork in PDF or AI format.

Q 3:How long is your delivery time?
Generally, it is 20-30 days if the goods are not in stock. It is according to quantity.

Q 4: Do you provide samples? Is it free or extra?
Yes, we could offer the sample but not for free. Actually, we have an excellent price principle, when you make the bulk order then the cost of the sample will be deducted.

Q 5: How extended is your warranty?
A: Our Warranty is 12 months under normal circumstances.

Q 6: What is the MOQ?
A: Usually our MOQ is 1pcs.

Q 7: Do you have inspection procedures for coupling?
A:100% self-inspection before packing.

Q 8: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.

Q 9: What’s your payment?
A:1) T/T. 

♦Contact Us

Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China

 

Reducing Downtime and Maintenance Costs with Jaw Couplings

Jaw couplings play a crucial role in reducing downtime and maintenance costs in mechanical systems. Here’s how they contribute to improved efficiency and cost-effectiveness:

• Shock Absorption: Jaw couplings feature an elastomeric spider between the hubs, which acts as a shock absorber. It helps dampen vibrations and shock loads, protecting connected equipment from sudden impacts. By minimizing the impact of shocks and vibrations, jaw couplings extend the lifespan of components and reduce the need for frequent repairs or replacements.
• Misalignment Compensation: In real-world applications, shaft misalignment is almost unavoidable due to factors such as temperature variations, foundation settling, or minor assembly errors. Jaw couplings can accommodate angular and parallel misalignment, reducing stress on connected equipment and minimizing wear on shafts and bearings.
• Fail-Safe Design: Jaw couplings are designed with a fail-safe feature. If the elastomeric spider fails due to wear or damage, the jaws of the coupling interlock, allowing the system to continue transmitting torque. This design prevents complete coupling failure and allows the machinery to keep running until scheduled maintenance can be performed.
• Easy Installation and Replacement: Jaw couplings are relatively easy to install and replace, which helps reduce downtime during maintenance or equipment upgrades. With simple set-screw or clamp-type hubs, the couplings can be quickly installed or removed without disassembling the entire system.
• Cost-Effectiveness: Compared to some other types of couplings, jaw couplings are generally more cost-effective. They offer reliable performance and misalignment compensation at a relatively lower cost. Additionally, the extended equipment lifespan and reduced maintenance needs contribute to long-term cost savings.

By providing shock absorption, misalignment compensation, fail-safe operation, easy installation, and cost-effectiveness, jaw couplings enhance the overall reliability and efficiency of mechanical systems, leading to reduced downtime and maintenance costs.

Can jaw couplings be used in marine and automotive applications?

Yes, jaw couplings can be used in both marine and automotive applications, and they have proven to be effective in various scenarios within these industries. Here’s how jaw couplings are utilized in marine and automotive settings:

Marine Applications:

In the marine industry, jaw couplings are commonly used to connect the engine to various components, such as propellers, pumps, generators, and auxiliary equipment. They offer several advantages that make them suitable for marine applications:

• Corrosion Resistance: Marine environments are exposed to saltwater and other corrosive elements. Jaw couplings made from materials such as stainless steel or other corrosion-resistant alloys can withstand these harsh conditions and ensure long-lasting performance.
• Misalignment Compensation: Vessel movement and hull flexing can lead to misalignment between the engine and driven components. Jaw couplings can accommodate both angular and parallel misalignment, ensuring efficient power transmission even in dynamic marine conditions.
• Vibration Damping: The elastomer spider in the jaw coupling absorbs vibrations generated by the engine and other equipment, contributing to smoother operation and reduced wear on the components.
• Compact Design: Space is often limited on boats and ships. Jaw couplings have a compact and lightweight design, making them suitable for applications with space constraints.

Automotive Applications:

In the automotive industry, jaw couplings are used in various applications, including power steering systems, engine-driven accessories, and HVAC blowers. They offer several benefits for automotive applications:

• Misalignment Compensation: Jaw couplings can handle small misalignments that can occur due to engine movements or assembly tolerances, ensuring reliable power transmission and reducing stress on the drivetrain.
• Vibration Damping: The elastomer spider in the jaw coupling dampens engine vibrations, contributing to a smoother and quieter ride for passengers.
• Compact and Lightweight: In modern vehicles, lightweight components are essential for fuel efficiency and overall performance. Jaw couplings’ compact design and low inertia make them suitable for automotive applications.
• Cost-Effectiveness: Jaw couplings are often more cost-effective compared to some other coupling types, making them a popular choice for automotive applications where cost considerations are essential.

In conclusion, jaw couplings are versatile and can be successfully used in marine and automotive applications. Their ability to handle misalignment, dampen vibrations, and provide efficient power transmission makes them reliable components in various dynamic and demanding environments.

Materials Used in Manufacturing Jaw Couplings

Jaw couplings are commonly made from various materials, each offering different properties and suitability for specific applications. Some of the commonly used materials include:

• Polyurethane (PU): PU jaw couplings are known for their flexibility, high elasticity, and resistance to abrasion. They are ideal for applications requiring vibration dampening and shock absorption.
• Aluminum: Aluminum jaw couplings are lightweight, corrosion-resistant, and have good thermal conductivity. They are commonly used in low-to-medium torque applications.
• Steel: Steel jaw couplings offer high strength and durability, making them suitable for heavy-duty applications with high torque requirements.
• Stainless Steel: Stainless steel jaw couplings are resistant to corrosion and are often used in applications where there is exposure to moisture, chemicals, or harsh environments.
• Bronze: Bronze jaw couplings are known for their excellent wear resistance and low coefficient of friction, making them suitable for applications with high-speed and low lubrication.
• Acetal: Acetal jaw couplings provide good chemical resistance and low moisture absorption, making them suitable for applications where chemical exposure is a concern.
• Nylon: Nylon jaw couplings offer good strength, flexibility, and resistance to wear and chemicals, making them suitable for various industrial applications.

The choice of material depends on factors such as torque requirements, environmental conditions, operating speeds, and budget considerations. Engineers and designers select the appropriate material to ensure that the jaw coupling can perform optimally and withstand the demands of the application.

editor by CX 2023-08-31