We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
75L Rubber Kneader Mixing Mill Machine
1- Name : Rubber banbury mixer Internal rubber mixer, Rubbe kneader.
Dispersion kneader, equipped with a pair of rotors which perform relative rotation with the specific shape, is a kind of machine for intermittently plasticating and mixing the polymer materials under with adjustable temperature and pressure.
3- Range for materials processing:
Rubber Compounds and End Products:
Natural Rubber, Synthetic Rubber, Mastication of NR, SBR, CR, EPDM, Fluorine Rubber, Silicone Rubber, ECT.
4- version: XSN-110/30
1)Maximum Dispersion & High Production
Double blades, proper clearance & high cooling effect gives excellent dispersion . Its production is 4 to 5 times more than an ordinary mixing mill thus saving on labor and electricity.
2)Easy Cleaning and Colour Change
Mixing chamber can be tilted which enables easy cleaning, because of this, different coloured compounds can be made nice.
3)Short Mixing Time
Mixing time ranging from 6 to 12 minutes depending on compound’s specific gravity.
6- Main parameters:
|Version & Parameters||XSN-35/30||XSN-55/30||XSN-75/30||XN-110|
|Mixing capacity (L)||35||55||75||110|
|Brake Motor (kw)||2.2||3.0||4.0||5.5|
|Air compressor (kw)||5.5||7.5||10||10|
|Cooling water (MPA)||0.3-0.4||0.3-0.4||0.3-0.4||0.3-0.4|
|Heating Steam (MPA)||0.5-0.8||0.5-0.8||0.5-0.8||0.5-0.8|
|EPT Heater (kw)||12||15||18||24|
|Overall Size L×W×H (mm)||3200×1900×2950||3750×1950×3050||3760×2143×3050||3930×3000×3660|
1. The mixing chamber is of drilled structure with quick and better beating/cooling effects.
The inner wall is coated with hard chrome for a long service life.
2. Bulid-up welding of hard alloy for the two,three,four ridge top and two sides of the
rotor, all the working surfaces are coated with hard chrome, good appearance and abrasive
resistance. The cooling/heating medium can pass through the hollow of the rotor.
3. The top of the rotor adopts constant hydraulic pressure seal structure, the seal effect
is good with a long service time and high pressure lubrication automatic alarm when using up
4. The upper bolt relieves the pressure automatically to protect the machine if the machine works a too long time under overload condition.
5. The working surface of up and down bolts are coated with hard chrome, good appearance and abrasive resistance. The cooling/heating medium can pass through the inner hollow of down bolt..
6. A rotary oil cylinder is used for the discharge door, smooth running and accurate positioning.
7. Use two shafts put-out hard teeth reducer and gear coupling or “+” type universal joint, the transmission is smooth with high efficiency, low noise level and long service life.
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.